XADO Atomic Metal Conditiner - Twin Turbo (Premium Edition)

SGD 95.00
+ -
In stock
Add to Wishlist

XADO Atomic Metal Conditioner 1 Stage Maximum "TWIN TURBO" is an upgraded innovative 4-component (4C) new generation product which combines advantages of metal conditioner, 2D sliding agent and Complex Adaptive Revitalizant®

Main Benefits
  • Heals damages of the friction surface up to 0.2 mm depth, due to the newest technology of the Complex Adaptive Revitalizant® ( CAR).
  • Restor es surfaces of parts and compensates the ongoing wear;
  • Levels and increases compression in cylinders;
  • Increa ses pressure in the oil system up to the nomi nal one;
  • Create s the active system of parts protection from loads and overheating;
  • Reduce s noise and vibrations;
  • Improv es oil lubricating propertie s and tribological characteristics of the engine assemblies;
  • Increases the service life span of the engine;
  • Reduces fuel consumption;
  • Increases engine capacity and acceleration capability.
Application

The temperature of the composition before application should not be lower than +25 °С. Shake the can

  • Introduce its contents into the oil filler neck of the engine warmed up to the operating temperature.
  • Start the engine and idle it for 3–5 minutes.
  • Operate your car in regular mode.
Notes
  • Specially developed for car engines.
  • The product can also be applied in light trucks, microbuses, and engines of other equipment with the oil system capacity of 3–10 L.
  • Compatible with all types of motor oils.
  • REVITALIZATION® occurs within 1,000–1,200 km of run. It is not recommended to change oil during this period.
  • The repeated application of АМС Maximum Twin Turbo is recommended after 100,000 km of run.
  • The product contains REVITALIZANT® in granules, which completely dissolve in oil at the operating temperature.

Metal conditioner with REVITALIZANT® is effective for gasoline, LPG, and diesel engines of cars and light trucks with an oil system volume of up to 10 L.

The protective coating remains active for 100,000 km of run; after that, it is recommended to repeat the treatment.

Dosage

1 can (360 ml) for the engine with an oil system capacity of 3–10 L. The oil level in the system should not exceed the maximum mark of the dipstick. Avoid overdosing. New advantages: Thanks to CAR, along with restoration and antiwear protection, the product for the first time provides an expanded range of regenerative properties of the surface.

  • RF=100 Plus;
  • RF (REVITALIZATION® factor) is an indicator of the effectiveness of restoration and antiwear protection of the engine
  • RF=100 Plus means that, as a result of application of the product, the engine has undergone a full treatment cycle, is guaranteed to be protected against wear, and has a reserve of regenerative properties of the coating* for 100,000 km of run

This means that, if within 100,000 km of run after the treatment a scratch appears on the friction surface, for example, due to accidental entry of a hard sand grain, then due to special properties and compressive stresses in the surface layer of the ceramic-metal coating, this scratch will be completely eliminated.

XADO Atomic Metal Conditioner 1 Stage Maximum "TWIN TURBO" is an upgraded innovative 4-component (4C) new generation product which combines advantages of metal conditioner, 2D sliding agent and Complex Adaptive Revitalizant®

Main Benefits
  • Heals damages of the friction surface up to 0.2 mm depth, due to the newest technology of the Complex Adaptive Revitalizant® ( CAR).
  • Restor es surfaces of parts and compensates the ongoing wear;
  • Levels and increases compression in cylinders;
  • Increa ses pressure in the oil system up to the nomi nal one;
  • Create s the active system of parts protection from loads and overheating;
  • Reduce s noise and vibrations;
  • Improv es oil lubricating propertie s and tribological characteristics of the engine assemblies;
  • Increases the service life span of the engine;
  • Reduces fuel consumption;
  • Increases engine capacity and acceleration capability.
Application

The temperature of the composition before application should not be lower than +25 °С. Shake the can

  • Introduce its contents into the oil filler neck of the engine warmed up to the operating temperature.
  • Start the engine and idle it for 3–5 minutes.
  • Operate your car in regular mode.
Notes
  • Specially developed for car engines.
  • The product can also be applied in light trucks, microbuses, and engines of other equipment with the oil system capacity of 3–10 L.
  • Compatible with all types of motor oils.
  • REVITALIZATION® occurs within 1,000–1,200 km of run. It is not recommended to change oil during this period.
  • The repeated application of АМС Maximum Twin Turbo is recommended after 100,000 km of run.
  • The product contains REVITALIZANT® in granules, which completely dissolve in oil at the operating temperature.

Metal conditioner with REVITALIZANT® is effective for gasoline, LPG, and diesel engines of cars and light trucks with an oil system volume of up to 10 L.

The protective coating remains active for 100,000 km of run; after that, it is recommended to repeat the treatment.

Dosage

1 can (360 ml) for the engine with an oil system capacity of 3–10 L. The oil level in the system should not exceed the maximum mark of the dipstick. Avoid overdosing. New advantages: Thanks to CAR, along with restoration and antiwear protection, the product for the first time provides an expanded range of regenerative properties of the surface.

  • RF=100 Plus;
  • RF (REVITALIZATION® factor) is an indicator of the effectiveness of restoration and antiwear protection of the engine
  • RF=100 Plus means that, as a result of application of the product, the engine has undergone a full treatment cycle, is guaranteed to be protected against wear, and has a reserve of regenerative properties of the coating* for 100,000 km of run

This means that, if within 100,000 km of run after the treatment a scratch appears on the friction surface, for example, due to accidental entry of a hard sand grain, then due to special properties and compressive stresses in the surface layer of the ceramic-metal coating, this scratch will be completely eliminated.