XADO Atomic Metal Conditioner 'Tuning'

SGD 45.00
+ -
In stock
Add to Wishlist

Intended for precise adjustment of engine parts to each other; guarantees minimal friction losses and the longest possible service life. This innovative three-component* product combines the benefits of a two-phase complex metal conditioner and 3rd generation REVITALIZANT®.

Main Benefits
  • Compensates for the ongoing wear of the engine
  • Equalizes compression in cylinders
  • Increases oil system pressure to the nominal level
  • Creates an active system to protect parts against overloads and overheating
  • Reduces noise and vibration
  • Improves lubricating properties of oil and tribological characteristics of engine assemblies
  • Increases engine service life
  • Reduces fuel consumption
  • Increases engine power and acceleration capability
Application

The temperature of the composition before application should not be lower than +25 °С.

  • Shake the can. Introduce its contents into the oil filler neck of the engine warmed up to the operating temperature. Start the engine and idle it for 3–5 minutes.
  • Afterwards, operate your car in regular mode.
Notes
  • Metal conditioner with REVITALIZANT® is effective for gasoline, LPG, and diesel engines of cars and light trucks with an oil system capacity of 3 to 5 L.
  • Compatible with all types of motor oils.
  • For turbocharged and high-powered engines, it is recommended to use the product at each oil change.
  • To achieve complete REVITALIZATION®, it is recommended to use XADO Maximum 1 Stage (RF=100).

The product contains REVITALIZANT® in granules, which completely dissolve in oil at the operating temperature.

Metal conditioner with REVITALIZANT® is effective for gasoline, LPG, and diesel engines of cars and light trucks with an oil system volume of 3 to 5 L.

RF=33.3
RF (REVITALIZATION® Factor) is an indicator of the effectiveness of restoration and antiwear protection of the engine RF=33.3 means that partial engine REVITALIZATION® has occurred

Intended for precise adjustment of engine parts to each other; guarantees minimal friction losses and the longest possible service life. This innovative three-component* product combines the benefits of a two-phase complex metal conditioner and 3rd generation REVITALIZANT®.

Main Benefits
  • Compensates for the ongoing wear of the engine
  • Equalizes compression in cylinders
  • Increases oil system pressure to the nominal level
  • Creates an active system to protect parts against overloads and overheating
  • Reduces noise and vibration
  • Improves lubricating properties of oil and tribological characteristics of engine assemblies
  • Increases engine service life
  • Reduces fuel consumption
  • Increases engine power and acceleration capability
Application

The temperature of the composition before application should not be lower than +25 °С.

  • Shake the can. Introduce its contents into the oil filler neck of the engine warmed up to the operating temperature. Start the engine and idle it for 3–5 minutes.
  • Afterwards, operate your car in regular mode.
Notes
  • Metal conditioner with REVITALIZANT® is effective for gasoline, LPG, and diesel engines of cars and light trucks with an oil system capacity of 3 to 5 L.
  • Compatible with all types of motor oils.
  • For turbocharged and high-powered engines, it is recommended to use the product at each oil change.
  • To achieve complete REVITALIZATION®, it is recommended to use XADO Maximum 1 Stage (RF=100).

The product contains REVITALIZANT® in granules, which completely dissolve in oil at the operating temperature.

Metal conditioner with REVITALIZANT® is effective for gasoline, LPG, and diesel engines of cars and light trucks with an oil system volume of 3 to 5 L.

RF=33.3
RF (REVITALIZATION® Factor) is an indicator of the effectiveness of restoration and antiwear protection of the engine RF=33.3 means that partial engine REVITALIZATION® has occurred