XADO EX120 Revitalizant Motorcycle

SGD 29.00
+ -
In stock
Add to Wishlist

Designed for restoration, repair, and antiwear protection of engines of motor equipment with combined or separate lubricating systems with the capacity of up to 1,000 cm³. Used in motorcycles, mopeds, snowmobiles, water and household motor equipment, lawn mowers, chainsaws, etc.

  • Restores the surface of engine cylinders, eliminates scuffs and scratches
  • Increases and equalizes compression in cylinders
  • Protects friction parts against wear
  • Significantly reduces fuel consumption
  • Restores engine power to nominal values
  • Extends engine life by up to three times
  • Decreases the amount of harmful emissions
  • Reduces noise and vibration
Application

For engines with a combined lubrication system:

  • Dissolve the contents of the syringe in a small amount (20–30 ml) of oil warmed to a temperature of at least +35 °С.
  • Introduce the composition into the tank before refueling.
  • Fully fill the tank with fuel.
  • Start the engine and let it idle for 2–3 minutes.
  • Afterwards, operate the equipment in regular mode.

For engines with a separate lubrication system:

  • Dissolve the contents of the syringe in a small amount (20–30 ml) of oil warmed to a temperature of at least +35 °С.
  • Warm up the engine to the operating temperature.
  • Introduce the composition into the oil filler neck.
  • Start the engine and let it idle for 2–3 minutes.
  • Afterwards, operate the equipment in regular mode.

Notes
  • The composition is equally effective for use in any two- and four-stroke internal combustion engines.
  • Has no effect on wet clutch performance.
  • In four-stroke engines, it is not recommended to change the oil before the end of the treatment.
  • The treatment is considered completed after at least 1,500 km of run or 20 hours of total operation of the engine.
  • If the engine capacity exceeds 1,000 cm3, it is necessary to double the dosage.
  • XADO REVITALIZANT® is compatible with any additives, metal conditioners, remetalizants, etc. regardless of the application sequence.
  • A protective ceramic-metal coating is formed on any surface made of any metal or alloy; however, if the unit is in critical condition (wear rate close to 100%), it is necessary to replace the damaged parts.

Designed for restoration, repair, and antiwear protection of engines of motor equipment with combined or separate lubricating systems with the capacity of up to 1,000 cm³. Used in motorcycles, mopeds, snowmobiles, water and household motor equipment, lawn mowers, chainsaws, etc.

  • Restores the surface of engine cylinders, eliminates scuffs and scratches
  • Increases and equalizes compression in cylinders
  • Protects friction parts against wear
  • Significantly reduces fuel consumption
  • Restores engine power to nominal values
  • Extends engine life by up to three times
  • Decreases the amount of harmful emissions
  • Reduces noise and vibration
Application

For engines with a combined lubrication system:

  • Dissolve the contents of the syringe in a small amount (20–30 ml) of oil warmed to a temperature of at least +35 °С.
  • Introduce the composition into the tank before refueling.
  • Fully fill the tank with fuel.
  • Start the engine and let it idle for 2–3 minutes.
  • Afterwards, operate the equipment in regular mode.

For engines with a separate lubrication system:

  • Dissolve the contents of the syringe in a small amount (20–30 ml) of oil warmed to a temperature of at least +35 °С.
  • Warm up the engine to the operating temperature.
  • Introduce the composition into the oil filler neck.
  • Start the engine and let it idle for 2–3 minutes.
  • Afterwards, operate the equipment in regular mode.

Notes
  • The composition is equally effective for use in any two- and four-stroke internal combustion engines.
  • Has no effect on wet clutch performance.
  • In four-stroke engines, it is not recommended to change the oil before the end of the treatment.
  • The treatment is considered completed after at least 1,500 km of run or 20 hours of total operation of the engine.
  • If the engine capacity exceeds 1,000 cm3, it is necessary to double the dosage.
  • XADO REVITALIZANT® is compatible with any additives, metal conditioners, remetalizants, etc. regardless of the application sequence.
  • A protective ceramic-metal coating is formed on any surface made of any metal or alloy; however, if the unit is in critical condition (wear rate close to 100%), it is necessary to replace the damaged parts.